Ka Band Power Amplifier 18-26.5GHz Psat CW 40W RF Power Amplifier
Description
The module is designed for both military and commercial applications. The latest device technologies and design methods are employed to offer high power density, efficiency, and linearity in a small, lightweight package.
Specification
Specifications subject to change without notice. Typical performance at +28VDC +25℃, and in a 50Ω system.
| ELECTRICAL SPECIFICATIONS@25℃ | ||||
| PARAMETER | MIN | TYPICAL | MAX | UNIT |
| Frequency Range | 18 | 26.5 | GHz | |
| Power Gain | 39 | dB | ||
| Gain control | dB | |||
| Power Gain Flatness | ±3 | dB | ||
| Noise Figure | dB | |||
| Output Power (Psat CW) | 40 | Watt | ||
| Spurious | -50 | dBc | ||
| Harmonic | -10 | dBc | ||
| Input VSWR | 2:1 | Ratio | ||
| Output VSWR | 2.5:1 | Ratio | ||
| Input Voltage | 180 | 220 | 240 | Volt |
| Human-computer Interface | touch screen LCD:Voltage,Current,Temperature,FWD/REV Power | |||
| Program Control Interfac | TCP/IP and Ethernet | |||
Note:
1. Input Signal:AM, FM, CW Pulse. LFM. Phase coded.
2. Over Temperature Protection; Over REV VSWR Protection; Over incentive protection.
3. Air forced cool.
4. Protection from Rain. Sand and Dust.
| ENVIRONMENTAL RATINGS | ||||
| PARAMETER | MIN | TYPICAL | MAX | UNIT |
| Max Input power | 0±6 | dBm | ||
| Operating Temperature | 0 | +55 | ℃ | |
| Non-operating Temperature | -10 | +70 | ℃ | |
| Relative humidity (non-condensing) | 90 | % | ||
| Altitude (MIL-STD-810F) | 10000 | 30000 | feet | |
| Shock / Vibration (MIL-STD-810F) | Airbone | |||
| MECHANICAL SPECIFICATIONS | |||
| PARAMETER | VALUE | LIMITS | UNIT |
| Dimensions | 3U D:500mm | Max | Millimeter |
| Weight | 16000±2500 | Max | gram |
| RF Connectors Input | 2.92mm-F | ||
| RF Connectors output | WR42 | ||
| Forward / Reverse Detection Connectors | 2.92mm-F | ||
| Impedance | Ohms | ||
