High-performance 2.6GHz to 3.95GHz Electric & Manual Waveguide Switches for communication systems, radar, and RF testing setups
Product introduction
| Frequency range | 2.6GHz to 3.95GHz | VSWR | ≤1.1 |
| Insertion Loss | ≤0.1dB | Port isolation | ≥80dB |
| Port Switching | Dual Knife, Dual Throw | Switching time | ≤120mS |
| Voltage range | 24V±10% | Steady state current | ≤3A |
| Flange connection | FDP32 | Working temperature | -40~+85℃ |
| Storage temperature | -50~+80℃ | Working environment | outdoor, waterproof, salt spray prevention |
Table 1 MS3112E10-6P Connector Pin Description
Pin number | A | B | C | D | E | F |
use | Power supply +24V | Ground (electric connection) | Power supply +24V | Connecting microswitch | Microswitch Ground | Connecting microswitch |
Table 2 Waveguide converter control wiring principle port signal definition
MS3112E10-6P | Signal Definition | instructions |
A | Power supply +24V | The switch switches the power supply and is in state Ⅰ (PORT1 and PORT4, PORT2 and PORT3 conductive) when A is connected to +24V for a duration of 120ms ± 20ms. |
B | Ground (electric connection) | |
C | Power supply +24V | The switch switches the power supply and is in state II (PORT1 and PORT2, PORT3 and PORT4 on) when C is connected to +24V for 120ms ± 20ms. |
D | Connecting microswitch | Switch state signal, when the switch is in state Ⅰ, pins D and E conduct. |
E | Microswitch Ground | Grounding is recommended. |
F | Connecting microswitch | Switch state signal,When the switch is in state II, pins E and F conduct. |
