Outline Dimensional Drawing
Specification
| RF / ELECTRICAL | ||||
| PARAMETER | MIN | TYP. | MAX | UNIT |
| Operating Frequency | 2000 | 6000 | MHz | |
| RF INPUT | 0 | 5 | dBm | |
| P-sat Power Output | 47 | dBm | ||
| Power Gain | 47 | dB | ||
| Power Gain Flatness | ±3 | dB | ||
| Input VSWR | 2 | |||
| Operating Voltage | 28 | VDC | ||
| In-Out impedance | 50 | Ω | ||
| Current | 9 | 10 | A | |
| MECHANICAL | ||
| PARAMETER | VALUE | UNIT |
| Dimensions (L x W x H) | 200x120x30 | mm |
| RF Connectors (Input / Output) | SMA- KFD/ SMA- KFD | — |
| DC / Control Connector | DB15 | — |
| Cooling | Consider heat dissipation with the system | — |
| Mounting | 3-6 Thru Hole | — |
| Weight | ≤1.5 | kg |
| ENVIRONMENTAL / PROTECTIONS | |||
| PARAMETER | MIN | MAX | UNIT |
| Operating Temp. (Housing Temp.) | -40 | +85 | °C |
| Humidity Range | 0-100 | % | |
| PA Baseplate Shutoff Temperature | + 90 | °C | |
| INPUT/OUTPUT PINS | ||
| AMPLIFIER CONNECTOR TYPE: | DB15 | |
| TRIAD CABLE PART NUMBER: | — | |
| PIN NUMBER | LABEL | DESCRIPTION |
| 1-3 | +VDC | +28V |
| 4-5 | GND | Ground |
| 6 | Amp Enable | Disable: TTL "High", Enable : TTL "Low" or No Connection (Low : 0~0.5V, High : 2.5~5V) |
| 7 | Temp Alarm | Temp Alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 8 | Reverse Power Alarm | Reverse Power Alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 9 | GND | Ground |
| 10 | Output Power monitoring | Output Power Detection (Output analog voltage) |
| 11 | Reverse Power monitoring | Reverse Power Detection (Output analog voltage) |
| 12 | Temp monitoring | Temp monitoring (Output analog voltage) |
| 13-15 | NC | NC |
