EMC High Power Amplifier 3-6 GHz Psat 100 W Wideband Power Amplifier
Description
The module is designed for both military and commercial applications. The latest device technologies and design methods are employed to offer high power density, efficiency, and linearity in a small, lightweight package.
Specification
Specifications subject to change without notice. Typical performance at +28VDC +25℃, and in a 50Ω system.
| ELECTRICAL SPECIFICATIONS@25℃ | ||||
| PARAMETER | MIN | TYPICAL | MAX | UNIT |
| Frequency Range | 3 | 6 | GHz | |
| Power Gain | 47 | 52 | dB | |
| Power Gain Flatness | ±2 | dB | ||
| Psat Power | 100 | Watt | ||
| Noise Figure | dBm | |||
| IP3 | dBm | |||
| Spurious | -60 | dBc | ||
| Harmonics | 15 | dBc | ||
| VSWR | Ratio | |||
| DC Power Supply | +28 | Volt | ||
| Current | 16 | A | ||
Note:
1.Air forced cool.
2.output VSWR protection; Over Temperature Protection; Over lnput Power Protection;
3.Current detection, temperature detection, TTL switch control (1ms max)
| ENVIRONMENTAL RATINGS | ||||
| PARAMETER | MIN | TYPICAL | MAX | UNIT |
| Max Input power | dBm | |||
| Operating Temperature | -40 | +80 | ℃ | |
| Non-operating Temperature | -55 | +125 | ℃ | |
| Relative humidity (non-condensing) | 95 | % | ||
| Altitude (MIL-STD-810F) | TBD | feet | ||
| Shock / Vibration (MIL-STD-810F) | TBD | |||
| MECHANICAL SPECIFICATIONS | |||
| PARAMETER | VALUE | LIMITS | UNIT |
| Dimensions | 360*200*50 | Max | Millimeter |
| Weight | 10 | Max | Kg |
| RF Connectors Input | SMA-F | ||
| RF Connectors output | N-F | ||
| DC Interface Connectors | |||
| Impedance | 50 | Ohms | |
